Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
ViewLux Roof Replacement & Installation in Sarasota: What to Know First
Independent ViewLux roof replacement and installation in Sarasota typically runs two to five days from tear-off to final inspection, depending on roof complexity, the condition of the existing decking, and whether we’re matching an existing ViewLux skylight or installing new units during the roof work. We’re a local, owner-operated company that has been installing and replacing roofs across Sarasota since 2011, and we give every ViewLux job the same treatment: honest pricing up front, a written line-item estimate, and the 36500-Day Done Right Promise behind every shingle we lay. If you own a ViewLux product and your roof has reached the end of its service life, or you’re building new and want ViewLux integrated into the roof system, this page is for you.

Call (941) 267-0779 and a live person picks up. No phone tree, no call center. That’s how we’ve operated since Ed Winslow put his name on the door.
How ViewLux Products Fail - and How We Fix Them
Sarasota’s climate punishes roof components in ways manufacturers rarely mention in the brochure. Here’s what we actually see on ViewLux jobs, and what we do about it.
- Flashing separation on older ViewLux deck-mounted skylights. We regularly see ViewLux deck-mounted skylights where the factory flashing kit has lifted at the corners after a decade of Sarasota sun and salt air. The sealant degrades, the aluminum expands and contracts, and a small gap forms that lets water track down along the curb. The fix isn’t more caulk. We pull the old flashing, inspect the curb for rot, install a new flashing kit with fresh underlayment lapped correctly, and re-seat the unit. Caulk over a failing flashing is a band-aid that fails again in twelve months.
- Condensation between glass panes on first-generation ViewLux sealed units. When the perimeter seal on an older ViewLux insulated glass unit fails, humid Florida air gets pulled between the panes and you get fog you can’t wipe off. Some roofers tell you to live with it. We don’t. The sash or glass unit needs replacement, and doing it while the roof is already open is the smart move, because the labor cost drops dramatically when we’re already on the roof with the right materials staged.
- Improper curb height on roof replacements. This is one we see often after a previous roofer did the work. Sarasota homes with low-slope or flat roof sections need a raised curb for any skylight, including ViewLux units. If the curb is too short, water pools against the frame after a heavy summer downpour and eventually finds its way inside. When we replace a roof around a ViewLux skylight, we verify the curb height against the roof’s slope and rebuild it taller if needed. It’s a small adjustment that prevents thousands of dollars in ceiling and drywall damage.
- Hail and wind damage to ViewLux acrylic domes on older models. Older ViewLux models you still find on Sarasota homes from the 1990s and early 2000s often used acrylic domes, which cloud and micro-crack from UV exposure and the occasional hailstorm that rolls through in summer. Replacing just the dome is possible on some models, but if the frame is corroded or the gasket seat is cracked, the smart money is on a full unit replacement. We’ll always show you both options with honest numbers.
- Weep-hole blockages causing interior staining. ViewLux units have weep holes designed to drain condensation and any incidental water away from the frame. In Sarasota, they clog with pollen, dirt, and salt residue. The symptom is a slow interior stain that spreads over months and no visible leak from the roof itself. The fix is clearing the weep system and verifying the drainage path is open, not tearing out drywall or replacing the unit. We check this before recommending any larger repair.
Our ViewLux Roof Replacement & Installation Process
Here’s exactly how a ViewLux roof replacement or installation goes when you call us.
- 1
Call and talk to a person. You call (941) 267-0779, a live person answers, and we schedule a time for a roof inspection. We’ll ask about your home’s age, the roof’s current condition, and any ViewLux products currently installed.
- 2
Full inspection and measurements. We inspect the existing roof system, the decking, the ViewLux components, and the attic ventilation. We measure, photograph, and document everything. You’ll see what we see.
- 3
Written line-item estimate. You get a written quote that breaks down materials, labor, the ViewLux components, and any decking replacement. No vague “roof replacement: one lump sum” line items. If you have a written estimate from another company, bring it. We’ll give you a free second opinion.
- 4
Parts decision: OEM vs. quality aftermarket. For ViewLux components, we always recommend OEM flashing kits and seals, because the fit tolerances matter and aftermarket flashing for ViewLux units is hit or miss. For roofing materials themselves (underlayment, shingles, metal, tile), we use proven brands that carry solid warranties and stand up to Sarasota’s wind and rain.
- 5
Roof replacement with ViewLux integration. We tear off the old roof, replace any damaged decking, install the new underlayment and roofing material, and install or re-install the ViewLux units with fresh flashing, correct curb height, and a clean drainage path. Every step follows manufacturer installation specs so your ViewLux warranty stays intact.
- 6
Water test and cleanup. We test the roof and every ViewLux unit for leaks, sweep the grounds, run a magnet over the yard for stray nails, and walk you through everything we did. Then we register the work and you have our 36500-Day Done Right Promise.
What ViewLux Roof Replacement & Installation Costs in Sarasota
Roof replacement in Sarasota has a wide range because no two roofs are the same. Here’s what you can expect to see on estimates from our team, based on the jobs we do every week in this market.
- Full roof replacement (asphalt shingle, standard 2,000 sq ft home with one ViewLux skylight): $11,000-$18,000 depending on shingle grade, decking condition, and roof complexity.
- Full roof replacement (tile or metal): $22,000-$45,000 depending on material, underlayment requirements, and existing tile condition.
- Single ViewLux skylight replacement during a roof job: $800-$2,200 depending on model, size, and whether the curb needs rebuilding.
- ViewLux flashing and reseal (no roof replacement): $350-$750 per unit.
- Decking replacement per sheet (if rot is found during tear-off): $65-$95 per sheet.
What moves the price: roof pitch, number of stories, accessibility for the crew, number of skylights, decking condition, and whether you’re going shingle, tile, or metal. We give you a fixed price in writing before we start, and we don’t surprise you with change orders when the roof is half off. Call (941) 267-0779 for an exact quote. Estimates are free.
Why Sarasota Homeowners Call Winslow Windows & Doors for ViewLux Work
We’ve been in business since 2011, and Ed Winslow has spent the better part of two decades installing and replacing windows, doors, and roofs across Southwest Florida. His name is on the truck and on the estimate. If something isn’t done right, you call the same number, talk to the same people, and we come back. That’s the 36500-Day Done Right Promise, and it isn’t boilerplate. It’s the standard we hold ourselves to on every ViewLux job, from a single skylight reseal to a full roof replacement.
Sarasota homeowners also call us because we know more than one brand. We’re authorized installers for PGT, CGI, CWS, ES Windows, and ViewLux, so if your ViewLux unit isn’t worth saving, we can show you alternatives that fit the same rough opening without starting from scratch. Every tech who arrives at your door is background-checked and in uniform, and you’ll know the price before we start. Ed’s name is on the door, and on every job we do.
FAQs
Yes, in most cases we can replace a ViewLux skylight, its flashing, or its glass without tearing off the rest of the roof, as long as the surrounding roofing material is still sound and the existing curb is in good shape. The most cost-effective time to do it is while a roof replacement is already underway, since the labor and access costs drop significantly. Call (941) 267-0779 and we’ll tell you honestly which route makes more sense for your home.
No, as long as the ViewLux components are removed, re-installed, or replaced according to ViewLux’s installation specifications. We follow those specs on every job and use OEM flashing kits and seals for ViewLux units. A sloppy roofer who reuses old flashing or caulks over a failing seal is the biggest threat to your warranty, not the roof replacement itself.
Once materials are ordered and permits are pulled, a standard shingle roof replacement with one or two ViewLux skylights is typically finished in two to five days. Tile and metal roofs take longer. Sarasota’s building department requires permits for roof replacement, and we pull all permits and handle all inspections. Call (941) 267-0779 and we’ll give you a straight timeline for your specific roof.
We use genuine ViewLux flashing kits and seals on ViewLux work. The fit tolerances and material compatibility matter here, especially in Sarasota’s heat and salt air, and aftermarket flashing for ViewLux units is unreliable. For the roofing materials themselves, we offer a range of proven shingle, tile, and metal options so you control the cost. We’ll show you both the OEM and material options before any work begins.
The short answer is that if your ViewLux unit is more than 15 years old, showing fog between the panes, or the frame has any corrosion, replacing it during the roof job is almost always the smarter money. You’re already paying for the labor to be on the roof, the materials are already staged, and you avoid paying for a second mobilization later. We’ll inspect the unit during our initial visit and show you exactly what condition it’s in.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Sarasota and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After