Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Therma-Tru Shingle, Tile & Metal Roofing in Sarasota: What to Know First
We provide independent Therma-Tru shingle, tile, and metal roofing service across Sarasota, from Southside Village to Palmer Ranch. Most single-family Therma-Tru roofing repairs wrap up in one visit, with the average job completed same-day once parts are in hand. We give you a written line-item price before any work begins, and the number on that paper is the number you pay. This page is for homeowners in Sarasota who own a Therma-Tru roofing system and want straight answers about repair options, costs, and what actually holds up in our coastal climate. Call (941) 267-0779 for a free estimate.

How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru builds a solid product, but every roofing system has weak points. Here’s what we see most often on Sarasota homes and exactly what we do about it.
- Tile Adhesion Failure on Classic Tile Series. In Sarasota, the combination of intense UV exposure and salt-heavy air breaks down the mortar set on Therma-Tru Classic Tile profiles faster than the manufacturer’s national averages suggest. We see tiles lifting along ridge lines after 8 to 12 years, not the 15-plus you’d get inland. Our fix: remove the failed set, inspect the underlayment for moisture intrusion, and re-set with a polymer-modified mortar rated for coastal humidity.
- Metal Panel Seam Separation on TruMetal Standing Seam. TruMetal panels expand and contract hard during Sarasota’s afternoon thunderstorm cycles. The thermal swing causes fasteners to back out along the seams, especially on west-facing roof planes. We re-secure using oversized stainless clips and re-caulk with a marine-grade sealant, which stops the leak without voiding your warranty.
- Shingle Granule Loss on TruDefinition Duration Shingles. We regularly see premature granule loss where irrigation overspray hits the roof edge. Sarasota’s hard water leaves mineral deposits that accelerate granule shedding on TruDefinition Duration shingles, particularly near gutter lines. Our repair involves replacing the affected courses and adjusting the irrigation heads, because fixing the shingles without fixing the water source means you’ll be calling us again in three years.
- Flashing Corrosion at Tile-to-Wall Transitions. Salt air eats standard galvanized flashing in 7 to 10 years on Therma-Tru tile installations near Sarasota Bay and the Intracoastal. The symptom is a slow ceiling stain after heavy rain, not a dramatic leak. We replace with copper or heavy-gauge aluminum flashing and re-detail the counterflashing so water sheds cleanly.
- Underlayment Deterioration Under Metal Roofing. On older Therma-Tru TruMetal installs, the original felt underlayment turns brittle from trapped heat. Once we pull panels for a repair, we find cracked underlayment that would never have been caught from a visual inspection. We replace the exposed sections with synthetic underlayment before re-installing the panels.
The common thread: Sarasota’s climate punishes roofing materials differently than inland Florida, and a Therma-Tru owner needs a roofer who knows those failure patterns. That’s what we bring to every job.
Our Therma-Tru Shingle, Tile & Metal Roofing Process
- 1
You call, a person answers. When you call (941) 267-0779, you get a live voice, not a voicemail tree. We schedule a visit inside our home county with no trip charge.
- 2
We diagnose on-site. Our technician walks the roof, identifies the failed component, and checks surrounding areas for the secondary damage that usually follows the first failure. On a Therma-Tru job, that means inspecting adjacent tiles or panels, not just the one that looks broken.
- 3
You get a written line-item quote before any work starts. We spell out OEM versus aftermarket parts, labor, and materials. You approve the number before we touch anything.
- 4
We execute the repair. For warranty-safe work, we use Therma-Tru OEM components where they still make sense. Where an OEM part is discontinued or overpriced, we source a quality aftermarket equivalent and tell you exactly what we’re using and why.
- 5
We test, then we show you the work. After the repair, we run water over the affected area and walk the roof edge to confirm clean drainage. You’ll see photos of the completed work before we leave.
- 6
You’re covered by the 36500-Day Done Right Promise. If it’s not done right, we make it right. That’s not a warranty card you file with a call center. It’s Ed’s commitment, and Ed’s name is on the door.
What Therma-Tru Shingle, Tile & Metal Roofing Costs in Sarasota
Here are honest price ranges for common Therma-Tru roofing work in Sarasota, based on what we’ve billed over the past several years:
- Shingle repair (small area, 3-5 shingles replaced): $220-$390
- Shingle repair (larger area, 100+ sq ft): $550-$950
- Tile re-set or replacement (single tile): $180-$300
- Tile re-set (multiple tiles along a ridge or valley): $450-$1,200 depending on access and underlayment condition
- Metal panel seam re-secure and seal (per seam): $150-$300
- Flashing replacement at a wall transition: $400-$850
What moves the price: roof pitch and access difficulty, whether the underlayment needs replacement, and whether you’re in a salt-exposure zone that requires upgraded materials. If you’re a senior or veteran, take 10% off any of those numbers, permanently. If you have a written estimate from another Sarasota roofer, bring it in and we’ll give you a free second opinion. Call (941) 267-0779 for an exact quote. Estimates are free.
Why Sarasota Homeowners Call Winslow Windows & Doors for Therma-Tru Work
We started Winslow Windows & Doors in 2011 because Ed Winslow got tired of watching homeowners get run around by contractors who wouldn’t answer the phone after the check cleared. We’re locally owned and owner-operated, with a published Sarasota address and license number. Every technician who arrives at your door is background-checked and in uniform, so you know exactly who’s walking up your driveway. We’re authorized installers for PGT, CGI, CWS, ES Windows, and Therma-Tru, which means we understand how these systems work together as part of your home’s full exterior protection. And when we say a live person answers 24/7, we mean it. Ed grew up in Miami, trained at Miami Dade College’s construction technology program, and has spent two decades installing and replacing roofs, windows, and doors across Southwest Florida. He knows what Sarasota salt air does to a roof because he’s fixed it a thousand times. My name’s on the door - literally. That means we get it right.
FAQs
No, not when the repair is done correctly. As an independent Therma-Tru service provider, we follow the manufacturer’s installation guidelines and use OEM or equivalent parts, which keeps your warranty intact. The warranty is more likely to be voided by neglect or an unqualified repair than by calling us.
Most Therma-Tru roofing repairs are done same-day once we diagnose the issue. Emergency leak calls get prioritized, because a leaking roof in Sarasota’s rainy season can go from bad to structural in a matter of weeks. Call (941) 267-0779 and we’ll get a technician out to look.
If the failure is isolated to a single tile, shingle course, or panel seam, repair is usually the right call. If you’re seeing widespread underlayment failure, multiple leaks, or granule loss across large sections, replacement may be cheaper than chasing repairs. We’ll tell you straight, with numbers for both options.
We use Therma-Tru OEM parts when they’re available and reasonably priced. When an OEM component is discontinued or marked up beyond any reasonable value, we source a quality aftermarket equivalent and tell you exactly what we’re installing before we install it. You’ll never get a parts mystery on our invoice.
Our repairs are built for Sarasota’s specific conditions: marine-grade sealants, corrosion-resistant fasteners, and underlayment upgrades where needed. Most repairs hold for 10 to 15 years. If anything we touch fails earlier, the 36500-Day Done Right Promise means we come back and fix it.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Sarasota and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After