Arched & Curved Windows in Sarasota, FL

Every visit starts with

Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style

Styles & brands we work with

‹

›

Before & after – our own jobs

‹

BeforeAfter

BeforeAfter

BeforeAfter

›

Arched & Curved Windows in Sarasota, FL

Arched and curved windows are custom-fabricated openings – semicircles, ellipses, eyebrow arches, or full radius curves – built to fit architectural shapes that no stock window from a big-box store will ever touch. In Sarasota, where Mediterranean Revival, Tuscan, and coastal contemporary homes line neighborhoods from Osprey to Lakewood Ranch, these windows are far more common than most people realize, and getting them right requires a fabricator and installer who actually understands the geometry. Winslow Windows & Doors has been measuring, sourcing, and installing arched and curved windows across Sarasota since 2011, and Ed Winslow stands behind every job personally.

If you’ve got a failing seal on a transom arch above your front door in Gulf Gate or a cracked curved lite in a Mediterranean-style home on Siesta Key, the answer isn’t a trip to a home improvement store. It’s a call to someone who can field-measure the opening, source the right custom impact window from a fabricator like PGT or CGI, and install it to Florida Building Code – impact-rated where required, energy-certified, and done right the first time. Call us at (941) 267-0779 and a live person will pick up, any hour of the day.

Arched and curved windows fall under our broader Custom & Geometric Windows in Sarasota service, which covers the full range of non-rectangular shapes – from trapezoids and octagons to the arched and eyebrow forms on this page.

When You Need Arched & Curved Windows

Not every window problem is a straightforward swap. Here are the situations we see most often with arched and curved units in Sarasota:

• Broken or fogged-over insulated glass in a fixed arch. Florida’s humidity cycles cause the desiccant inside double-pane units to fail faster in fixed (non-operable) arched windows because heat has nowhere to go. Once that seal breaks, the foggy haze is permanent – and it usually can’t be re-glazed in a stock unit.
• Storm damage after a named hurricane or tropical system. Sarasota sits in a coastal exposure zone where wind-borne debris moves fast. An arched window that wasn’t originally impact-rated is especially vulnerable because its curved frame can flex differently under lateral pressure than a standard rectangular unit.
• Drafts and water infiltration around an older radius frame. Many homes built in Sarasota between 1985 and 2005 used aluminum-framed arch windows with single-pane glass and minimal flashing. As the frames age and the caulk shrinks in our summer heat, air and water find their way in – especially during the long rainy season that runs June through September.
• Renovating or restoring a Mediterranean Revival or Spanish Colonial home. Neighborhoods like Harbor Acres, McClellan Park, and parts of the Rosemary District have homes with original arched openings that need period-appropriate replacements – curved sidelites, elliptical transoms, or full half-round units that match the original profile without looking like a modern substitute.
• Upgrading a non-impact arch to meet current Florida code. If you’re adding square footage, pulling a permit for a renovation, or your insurance carrier has flagged your opening protection status, a non-impact arched window in a wind-borne debris region may need to be upgraded. We handle the measurement, permit documentation, and installation from start to finish.
• New construction or addition with a custom curved opening. Architects and custom builders in Sarasota sometimes spec an arched window that doesn’t correspond to any standard size. We work from the rough opening and architectural drawings to source or fabricate to spec.

Our Arched & Curved Windows Process

Custom window work is slower than a standard replacement – intentionally so. A unit built to the wrong dimension is scrap. Here’s exactly how we handle it:

1. Field measurement and opening assessment. We don’t work from homeowner measurements on arched openings. Ed or one of our trained technicians comes to your Sarasota home, measures the rough opening at multiple points – radius, chord width, rise height, and any asymmetry – and documents the frame depth, wall thickness, and existing flashing condition. Arched openings in older Sarasota homes are rarely perfectly symmetrical, and a quarter-inch error compounds around a curve.
2. Fabrication sourcing and specification. We work with manufacturers like PGT and CGI who produce custom radius and arch units to order, including impact-laminated glass options that meet Florida’s High-Velocity Hurricane Zone requirements. We’ll confirm the glass package – Low-E coating, argon fill, impact laminate if required – and walk you through the options before anything is ordered. No surprises.
3. Permit coordination where required. In Sarasota County, replacement windows that change size, alter the opening, or require impact-rated glazing typically require a building permit. We handle the permit application and the scheduling of any required inspections so you’re not chasing the building department on your own.
4. Removal and rough opening prep. We remove the existing unit carefully to avoid damaging the surrounding stucco or drywall – a real concern with arched openings where the curved head is often integral to the masonry. We inspect the rough opening for rot, water damage, or previous shoddy flashing before the new unit goes in.
5. Installation and weatherproofing. The new arched or curved window is set, shimmed, and fastened per the manufacturer’s installation instructions and Florida Building Code. Flashing tape, sealant, and – where applicable – an approved buck system are applied in the right sequence. This is the step most big-box installers rush; we don’t.
6. Final inspection and walkthrough. We walk the job with you before we leave, show you the finished installation from both inside and outside, confirm the glass is clean and undamaged, and make sure you have any applicable product warranty documentation. If something isn’t right, we make it right – that’s the 36500-Day Done Right Promise, and it’s not a marketing line.

Arched & Curved Windows Pricing in Sarasota

Arched and curved windows in Sarasota typically run between $600 and $2,800 per unit installed, depending on size, glass package, and whether impact glazing is required. That’s a wide range, and the factors below explain most of the variation. We give you an exact, written number before anything is ordered – upfront pricing, no surprises on the invoice.

What affects your final cost most:

• Size and radius complexity. A clean half-round over a door is simpler to fabricate than a compound-curve ellipse or an asymmetric eyebrow arch. More complex geometry means more fabrication time and a higher unit cost.
• Impact glazing requirement. Sarasota County sits in a wind-borne debris region. If your home is within a mile of the coast or if you’re pulling a permit for the replacement, impact-laminated glass is almost certainly required. Units from PGT or CGI built to Miami-Dade or Florida Product Approval standards cost more – but they also lower your insurance exposure and protect the opening properly.
• Frame condition and prep work. An arch opening in a 1990s stucco home in Palmer Ranch may have deteriorated wood blocking or cracked lintels that need repair before a new unit can go in. We identify this at the measurement visit, not halfway through the job.
• Lead time on fabrication. Custom arched units from major manufacturers currently run four to eight weeks from order to delivery in the Sarasota market. Rush fabrication is sometimes available at a premium – we’ll tell you the honest timeline upfront.

If your repair total is over $200, our standing $40 off any repair over $200 discount applies automatically. Seniors and veterans receive a permanent 10% discount on any job. Estimates are always free – call (941) 267-0779 and we’ll get someone out to measure.

FAQs – Arched & Curved Windows

Can arched windows be replaced without disturbing the surrounding stucco?

Yes, in most cases. When the rough opening and frame dimensions are preserved, we can remove the old unit and install the new one through the existing opening without cutting into the surrounding stucco. The key is careful removal – we score the sealant perimeter and work slowly around the curved head so the stucco finish stays intact. In older Sarasota homes where the stucco has already cracked along the arch, we’ll flag that during the measurement visit and give you an honest assessment of whether any patch work will be needed. Call (941) 267-0779 for a free on-site look – we’d rather tell you the truth before the job than after.

Do arched windows in Sarasota need to be impact-rated?

In most cases, yes. Sarasota County falls within Florida’s wind-borne debris region, and arched or curved windows are treated no differently than rectangular units under the Florida Building Code – they must meet the same impact or protective covering requirements. If you’re pulling a permit, your inspector will require documentation of compliance. Even if you’re doing a like-for-like replacement without a permit, bringing the unit up to current impact standards is worth the additional cost given Sarasota’s storm exposure. We source impact-rated arch units from manufacturers like PGT and CGI that carry valid Florida Product Approvals, and we can walk you through the documentation. Questions about your specific situation? Call (941) 267-0779.

How long does a custom arched window replacement take from start to finish in Sarasota?

The typical timeline is six to ten weeks from the initial measurement to installation day. The measurement visit and estimate take about an hour. Permit approval in Sarasota County currently runs one to three weeks. Custom fabrication from manufacturers like CGI or PGT adds another four to six weeks. The actual installation, once the unit arrives, is usually one to two days depending on the number of openings and the complexity of the frames. We give you a realistic schedule at the estimate – not an optimistic one designed to get you to sign.

Is it worth repairing a fogged arched window, or should I just replace it?

For arched and curved windows, replacement almost always makes more sense than repair. Resealing a failed double-pane arch unit is technically possible but rarely cost-effective – the curved glass has to be removed, cleaned, and resealed with new spacer material, and the labor cost often approaches the cost of a new unit. More importantly, a seal failure usually signals that the frame itself is aging. In Sarasota’s humid climate, a 15-year-old arched unit with a blown seal is likely showing other signs of wear – hardware corrosion, frame oxidation, degraded weatherstripping – that a re-glaze won’t address. We’ll give you an honest assessment of whether repair or replacement makes more financial sense for your specific window during the free estimate visit.

Key Takeaways

• Arched and curved windows are custom-fabricated to your opening – no stock substitute will fit correctly.
• Sarasota’s coastal exposure means impact-rated glazing is required in most replacement scenarios.
• Installed costs typically range from $600 to $2,800+ per unit, depending on size, glass package, and permit requirements.
• The full process – measurement, permit, fabrication, and installation – runs six to ten weeks on average in the Sarasota market.
• Winslow Windows & Doors has been handling custom arch and curved window work in Sarasota since 2011, backed by the 36500-Day Done Right Promise.
• Seniors and veterans receive 10% off every job, and any repair over $200 qualifies for $40 off – no expiration, no fine print.

Ready to Get a Free Estimate?

If you have an arched or curved window that’s fogged, damaged, leaking, or simply past its useful life, the next step is a field measurement – there’s no other way to quote a custom opening accurately. Winslow Windows & Doors serves homeowners across Sarasota, from South Sarasota and Gulf Gate to the Rosemary District and Lakewood Ranch. We’re locally owned, Ed Winslow’s name is on every job, and a live person answers the phone around the clock.

Call (941) 267-0779 to schedule your free on-site estimate. No trip charge inside the home county, no voicemail loops, no next-business-day callbacks. Just a straight answer from someone who knows what they’re doing – and stands behind it.

For the full range of non-rectangular window options we offer, visit our home page or explore our complete Custom & Geometric Windows in Sarasota service.

Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Sarasota since 2011.